Levi Posted June 13 Posted June 13 Een draadje toegewijd aan Oumo, hier kan alles besproken betreffende de handvaten, knopen, kortingen,… 1
Levi Posted June 13 Author Posted June 13 Binnen 3 dagen zullen er nieuwe handvaten aangeboden worden. 👀 7
Levi Posted June 14 Author Posted June 14 Super Fiber ST-2 Hi，everyone， It has been 8 months since the release of ST-1. ST-1 has been widely recognized by the market. But ST-1 still did not meet my expectations for the super fiber series. So, we started to develop ST-2 after ST-1 was launched. The development of ST-2 is nearing completion, and global testing will begin in late July or early August. At that time, I will invite OUMO's global testing team to conduct testing and make final improvements. ST-2 uses a thinner fiber and reduces the curvature of the hair, which can provide greater density and a fuller touch. Stay tuned, I will update the latest developments at any time. Best regards， Carry 6
Coenetje Posted June 14 Posted June 14 Oh jeetje... Nog meer kwasten met nog meer knopen om uit te proberen 😅 1 1 1
dhr K Posted June 15 Posted June 15 @ Coenetje Ja maar deze maakt alle andere kwasten overbodig.....😇 9
Julyan Posted June 18 Posted June 18 meer updates voor Vaderdag https://oumoshavingbrush.com/collections/fathers-day-update-glaze-handle 6
Julyan Posted July 16 Posted July 16 https://oumoshavingbrush.com/collections/customisation-ebonite-brush-handles 6
Levi Posted July 16 Author Posted July 16 3 uren geleden, Julyan zei: https://oumoshavingbrush.com/collections/customisation-ebonite-brush-handles Ik zal niet kijken 🙈🫣. Btw ook summer clearance 😳😇 5
Levi Posted July 30 Author Posted July 30 Hi Everyone， I am honored to announce it to everyone. ST-2 has entered the end of research and development. We are currently choosing between ultra-fine fiber and sub-fine fiber specifications. But we still want to leave the final decision to everyone. We try our best to send both fiber brush knots to everyone for testing. The final ST-2 specifications will be decided based on everyone's feedback. We hope to provide a fiber with the ultimate touch, using the same DONGLI material as ST-1. The difference is that we use a more sophisticated production process. In fact, we have also considered South Korea's Hyundai fiber, but this fiber processing technology is not mature yet, and this material may be used in the ST-3 launched in 2025. In fact, when we were developing ST-2, we wanted to try a spiral wire structure, which has stronger water storage performance, but it was difficult to make and the cost increased. So I can only give up. Everything takes time to complete. Fortunately, we still have a lot of technologies that we can try and can provide you with more surprising products in the future! Best regards， Carry 5 1
Levi Posted August 26 Author Posted August 26 Ik heb mij ingeschreven als tester voor de nieuwe ST-2 knop 🤗 6 1
Coenetje Posted August 26 Posted August 26 @ Levi ik ook! Bij de bestelling van afgelopen week aangegeven en ben benieuwd! 2
Levi Posted August 26 Author Posted August 26 @ Coenetje na de “aankoop” van de test kwast hebben ze jou ook gecontacteerd via e-mail? 1
Julyan Posted August 26 Posted August 26 klinkt goed. was een soort microfibers toch? 10$ + 15$ verzenden zie ik 1
Levi Posted August 26 Author Posted August 26 23 minuten geleden, Julyan zei: klinkt goed. was een soort microfibers toch? 10$ + 15$ verzenden zie ik Microfiber en sub-microfiber. Je moet er wel voor betalen. 1 1
Julyan Posted August 26 Posted August 26 ik las dat hij de microfiber het interessantst vond Quote Currently, I am basically determined to use microfiber as the final version of ST-2, but we will still provide two versions of ST-2 samples for global testers to experience and compare as much as possible. Global testing will also commence at the end of this month. 2
Coenetje Posted August 26 Posted August 26 @ Levi nee ik niet specifiek mailcontact gehad over de testkwast, wel over het aanpassen van de knoop (zal toch de ACE A-1 knoop gaan worden) 2
Levi Posted August 26 Author Posted August 26 3 uren geleden, Coenetje zei: @ Levi nee ik niet specifiek mailcontact gehad over de testkwast, wel over het aanpassen van de knoop (zal toch de ACE A-1 knoop gaan worden) Fijne knoop die ACE A-1, die Lotus LM-1 zou heel zacht zijn maar gaat niet lang mee. De haren zijn zodanig behandeld dat de knoop snel verslijt. Achter een gebruik van één jaar zou hij rijp zijn voor de vuilbak. 2
Coenetje Posted September 10 Posted September 10 Spannend hoor! 😁 Ben wel heel benieuwd, waarschijnlijk deze week ook de kwast met ACE knoop binnen. 1 1
iwan073 Posted September 10 Posted September 10 Heb even op de website gekeken. Dat zijn mooie kwasten zeg! 🥰 2
Coenetje Posted September 11 Posted September 11 Vandaag binnengekregen: Oumo Pandora "Underworld" handgreep met 27mm ACE A-1 two band fan. Voor en na een wasbeurtje. 7
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now